The arc furnace pictured below, fabricated by the Rose Corporation, was ordered by a customer building a new foundry in Santiago, Chile. It is a duplication of an arc furnace originally designed and manufactured in 1980 for that same customer. The original furnace performed so well the customer wanted an exact duplicate. The new furnace […]
The team at The Rose Corporation recently completed the inspection and replacement of the wear bars on two existing 22-1/2 Ton Ladle Lifting Hooks for a local Steel Mill. The job requirements included: The inspection of hooks for any loose rivets, which we then removed and replaced if required. The removal of worn wear bars
After years of using the A.O.D. Vessel under extreme heat conditions by a local specialty steel mill, the center main body bulged out of round by as much as 3-inches making it impossible to fit into the trunnion ring that supports it. We were contracted to replace the center section (1-1/2” thick steel cylinder) Time was of
Recently, The Rose Corporation repaired a number of Ladles that are used to pour molten metal in large manufacturing and foundry processes. These Ladles are prone to damage from the heat of the molten metal within them. Several of these Ladles had their Refractory Lining fail, resulting in their shells being damaged. In order to
The Rose Corporation specializes in large-scale, complex, steel industrial fabrication and contract manufacturing. Our team of highly skilled fabricators and machinists have extensive experience manufacturing heavy industrial components and have built a reputation for delivering the highest quality work on time and within budget.
